Aisha K.
Mar 12, 2026
Clean layout and the results update instantly. Exactly what I needed for a quick planning check.
Construction & Bidding
Construction Job Bid Profit Calculator — Markup & Margin
Direct cost = materials + labor + overhead; bid = direct cost × (1 + markup%).
Calculate bid price, net profit, and margin from materials, labor hours, overhead, and markup. Planning estimates only — verify measurements and local codes on site.
Inputs
0500000
0500
15200
050000
0100
Smart analysis
Recommendations
Tailored to your live inputs and result—guidance only, not professional advice.
- Interpret
Treat this as a planning estimate
Primary result: Bid price = $4,296.00. Re-run with optimistic and pessimistic inputs to understand the range—not just a single point.
Scenario studio
Compare A vs B
Capture two sets of inputs on this device, then see which outcome wins. Share either scenario with a link.
Scenario A
Adjust inputs, then capture this slot.
Scenario B
Adjust inputs, then capture this slot.
Plain-English guide
Terms & how it works
Confused by a field? Read the short definitions here while you use the tool.
Materials
The “Materials ($)” value used in this tool’s formula. Adjust it to see results update live.
Labor hours
The “Labor hours” value used in this tool’s formula. Adjust it to see results update live.
Labor rate ($/hr)
The “Labor rate ($/hr)” value used in this tool’s formula. Adjust it to see results update live.
Overhead
The “Overhead ($)” value used in this tool’s formula. Adjust it to see results update live.
Markup on cost (%)
One-time or recurring costs that affect total money paid.
- materials
Materials ($)
The “Materials ($)” field. Default 2400; typical range 0–500000.
- overhead
Overhead ($)
The “Overhead ($)” field. Default 300; typical range 0–50000.
How this calculator works
Calculate bid price, net profit, and margin from materials, labor hours, overhead, and markup. Planning estimates only — verify measurements and local codes on site. Direct cost = materials + labor + overhead; bid = direct cost × (1 + markup%). Example: $2,400 materials + 16 hrs × $55/hr + $300 overhead, 20% markup → $4,060 bid, ~16.7% margin.
Direct cost = materials + labor + overhead; bid = direct cost × (1 + markup%).
Example: $2,400 materials + 16 hrs × $55/hr + $300 overhead, 20% markup → $4,060 bid, ~16.7% margin.
When to use this Job Bid Profit
Common use cases
- Calculate bid price, net profit, and margin from materials, labor hours, overhead, and markup.
- Sanity-check with this case: $2,400 materials + 16 hrs × $55/hr + $300 overhead, 20% markup → $4,060 bid, ~16.7% margin.
- The relationship is: Direct cost = materials + labor + overhead; bid = direct cost × (1 + markup%).
Localized examples
- Construction & Bidding: the example on this page uses the same formula as the widget.
What you get
- Fields: Materials ($), Labor hours, Labor rate ($/hr), Overhead ($)
- Direct cost = materials + labor + overhead; bid = direct cost × (1 + markup%).
- Example on the page: $2,400 materials + 16 hrs × $55/hr + $300 overhead, 20% markup → $4,060 bid, ~16.7% margin.
How to Calculate Job Bid Profit Step-by-Step
- 1Enter Materials ($), Labor hours, Labor rate ($/hr), then the remaining fields. Use the values you have, not a catalog average, unless that is all you know.
- 2Direct cost = materials + labor + overhead; bid = direct cost × (1 + markup%).
- 3Worked case: $2,400 materials + 16 hrs × $55/hr + $300 overhead, 20% markup → $4,060 bid, ~16.7% margin.
- 4Buy materials after you walk the job. This is a first-pass quantity, not a purchase order.
Governing formula
Direct cost = materials + labor + overhead; bid = direct cost × (1 + markup%).
$2,400 materials + 16 hrs × $55/hr + $300 overhead, 20% markup → $4,060 bid, ~16.7% margin.
Example: set Materials ($) = 2,400, Labor hours = 16, Labor rate ($/hr) = 55, then read the result.
Variable definitions
- materials
Materials ($)
The “Materials ($)” field. Default 2400; typical range 0–500000.
- laborHours
Labor hours
The “Labor hours” field. Default 16; typical range 0–500.
- laborRate
Labor rate ($/hr)
The “Labor rate ($/hr)” field. Default 55; typical range 15–200.
- overhead
Overhead ($)
The “Overhead ($)” field. Default 300; typical range 0–50000.
- markupPercent
Markup on cost (%)
The “Markup on cost (%)” field. Default 20; typical range 0–100.
- The takeoff (Direct cost = materials + labor + overhead; bid = direct cost × (1 + markup%).) ignores waste, code, and what you find when you open the wall. Measure twice on site.
- Nothing here is uploaded for the calculation itself.
Frequently Asked Questions
Direct cost = materials + labor + overhead; bid = direct cost × (1 + markup%).
Related calculators
Construction & Bidding
- Change Order Impact CalculatorCompare original vs revised bid margin after scope/cost changes.
- Crew Day-Rate vs Piece-Rate CalculatorEffective hourly and job cost for day-rate vs piece-rate crews.
- Job Contingency CalculatorContingency $ and % from job value and risk tier.
- Permit & Overhead Recovery CalculatorOverhead recovery add-on per job from monthly overhead and job duration.
- Concrete Volume CalculatorVolume in cu yd and 80 lb bags from slab dimensions.
- Drywall Sheet & Mud CalculatorSheets and mud from wall/ceiling surface area with waste.
Get a note when we add a planner
Occasional email when something new is worth opening. We never share your address. Unsubscribe anytime.
Discover & search
Explore More Tools
Related tools in Construction & Bidding — strengthening topical internal links.
Same category · 3 tools
Browse all →Change Order Impact Calculator
Construction & Bidding
Compare original vs revised bid margin after scope/cost changes.
Concrete Volume Calculator
Construction & Bidding
Volume in cu yd and 80 lb bags from slab dimensions.
Remodel Room Cost Ballpark Calculator
Construction & Bidding
Low/high remodel estimate from room size and $/sq ft range.
Community
Reviews & Ratings
See what others think about this tool, then leave your own rating to help improve CalculioHub.
4.8
out of 5.0
4 reviews
Daniel R.
Feb 28, 2026
Very usable on mobile. Would love a save/export option later, but the math feels solid.
Priya S.
Feb 3, 2026
The FAQ section answered my questions before I even had to search. Smooth dark mode too.
Marcus L.
Jan 19, 2026
Simple inputs, clear outputs. This replaced three bookmarks I used to juggle.
Improve this tool
Suggestion Box
Share an idea, report a bug, or send general feedback for Job Bid Profit Calculator. Your input helps shape what we build next.